The introduction of product:

Furniture mechanical integrated test machine was designed according to GB/T10357.1_GB/T10357.9 and QB/T2280 related furniture standards.It Is Office furniture and indoor and outdoor furniture including integrated testing machine,It can adjust the position and angle of the frame, cylinder per your request. According to a test for the selection of appropriate power to test. Various tests using its adjustable frame to install the number of cylinders,various tests with its adjustable frame and install cylinder to complete.It meets strength and durability test of ark, desk, bed, chair and so on.The test requirement about cabinets, drawers and doors is very strict.It must achieve the control of speed.The test machine is in a simple cylinder loading way and can't meet the test requirement.our company adopts a new way created by ourselves.It can meet the test requirement well.It is suitable for the customers including the Laboratory of furniture and Product quality certification institutions.

Technical Parameters:

Load: 0 ~ 250kg, 0 ~ 500kg can be specified.

Loading accuracy: 1/10000

Load precision: static: soil 0.5%, dynamic force: 0-5%

Travel: 0 ~ 500mm ~ 300mm, 0, 0 ~ 800mm can choose cylinder set

in all actions in the pause time: 0. 01S ~ 99S can be set

Test speed: 5 ~ 30 times per minute can be set

Test number: 0 ~ 999,999 times can be set

The use of gas pressure: 8KG/CM2

At the same time you can test the workpiece number: 12 (maximum)

The test space: 3m×9m

The composition of the equipment:

1.The control system can meet 12 cylinders work at the same time.Each of cylinders can work independently.They can also work in a group.For cylinders work in the same group, the operating system can control each cylinder's operating sequence and the loading time.It means that loading time,holding time and waiting time can be set by computer.

2.If magnetic valve used for electricity distribution,pressure regulating double used for filtering oil and water or position sensor is damaged,the test machine can stop automatically.test number:0---999,999.times can be set.It can stop automatically when it reaches the setting number.It can also save the test results automatically if the machine is stopped or the power is interrupted suddenly.

3.Computer + loading form closed-loop force control which is controlled by the program that has been set on the computer(directly set test requirement on the computer,such as force value,shift and so on.not need adjust the pressure of cylinder and the limit sensor on the cylinder.)Controlled by the computer equipment to run automatically.12 control channels can use force value to control.It is four channels that can not only be controlled by force value,but also shift distance.

4.The computer program can set the force value and the test number of testing.The computer can also display the force value and the test number on its screen directly.when it is broken down,the alarm will ring automatically.

5.If the detected specimen is damaged.The tester stops and saves the testing results.The test report can be edited after the experiment.

6.Cylinder on the beam or column can be moved horizontally and vertically.The angle of fixed device can be set.Fixed way can choose any force application Angle.The cylinder can rotate 360 degrees and position  in the vertical direction of the frame.Don't need to remove the cylinder's fixed position when it is rotating.

7.There is no need for people to look after the test.The test experiment can stop testing when it is finished or the specimen is damaged. The machine can also save the test results at the same time.

8.Test system has automatic modulation ability, when using standard weight to adjust the force value,the system can adjust automatically if it occurs deviation.Correction factor and force value can be saved for the same machine at the same time.It is easy to operate because it can call the history of correction.

9.Software can control six channels at the same time, Each channel is operated by benchmark synchronization time.This ensures that action and data processing can be synchronous.Different channels divided into groups to control, if there is a sample in a channel is already broken, the associated channels in the same group will stop at the same time, the rest of  channels can continue to work.

10.There is no less than 12 scram buttons.The device can be stopped in each button in emergency circumstances that makes it conveniently.

Standards:

1,QB/T2280-2007

2,GB/Tl0357．1－

3,GB/Tl0357．2－

4,GB/Tl0357．3－

5,GB/Tl0357．4－

6,GB/Tl0357．5－

7,GB/Tl0357．6－

8,GB/Tl0357．7－